MCV-1680G machining center machine
发布日期：2022-03-25 浏览次数：311
 MCV-1680G vertical machining center machine
|
Description of model characteristics:
1. The casting material shall be MIHANNA (closely baked) casting FC-30 #.
2. The column is of herringbone triangle structure.
3. The spindle head is reinforced with bones and muscles
Germany FAG P4 or Japan NSK P4 high-speed high-precision bevel ball bearing, the spindle uses a high strength and toughness four claw broach
Spindle air curtain dust-proof device
4. The three-axis motor and precision high-speed ball screw adopt Taiwan Shangyin C3 or Yintai C3
The X/Y/Z axis adopts German REXROTH linear guide rail
6. It adopts Taiwan's first brand tool changer, which is fast, easy to operate and has a long life, to provide stable and reliable tool exchange action.
7. The appearance of the machine table sheet metal is beautiful, which conforms to ergonomics and national CE standards
8. The operation panel adopts the original imported panel of Taiwan famous brand, and all main wire rods adopt the original imported wire rods from Taiwan
Technical Parameters and Specifications of MCV-1680G Vertical Machining Center
| ITEM |
UNIT |
Specifications |
|||
|
Table |
|||||
|
Table area (long × Width) |
mm |
1700×820 |
|||
|
T-slot size (slot width × Quantity × Spacing) |
mm |
18×7×120 |
|||
|
Accuracy grade of T-groove |
- |
H7 |
|||
|
Maximum weight of work-piece carried by worktable |
kg |
2200 |
|||
|
Travel |
|||||
|
X-axis stroke |
mm |
1600 |
|||
|
Y-axis stroke |
mm |
820 |
|||
|
Z-axis stroke |
mm |
700 |
|||
|
Distance from spindle nose to worktable |
mm |
180-880 |
|||
|
Distance from spindle center to column rail surface |
mm |
900 |
|||
|
Design and type of three-axis track (three-axis rigid rail) |
|||||
|
Track specification width |
mm |
X axis: 100/Y axis: 125/Z axis: 125 |
|||
|
Number of X.Y.Z axis rails |
- |
X axis: 2 rails/Y axis: 4 rails/Z axis: 2 rails |
|||
|
SPINDLE / Feed |
|||||
|
Spindle transmission mode |
|
Gearbox transmission |
|||
|
Gear ratio (two-stage speed change) |
|
High gear 1:1/low gear 1:4 |
|||
|
Shift mode |
|
Hydraulic automatic shift |
|||
|
Spindle speed |
rpm |
50-6000 |
|||
|
Maximum torque of spindle |
N-M |
764 |
|||
|
Taper/spindle diameter/Latin specification |
|
BT-50 /φ190 / MAS403-BT50-45 |
|||
|
Cutting feed rate |
mm/min |
1～10000 |
|||
|
Three axis fast moving speed |
mm/min |
X axis: 15000/Y axis: 15000/Z axis: 15000 |
|||
|
ACCURACY |
|||||
|
positioning accuracy |
mm |
300mm ± 0.005 (any position) |
|||
|
Repetitive positioning accuracy |
mm |
300mm ± 0.003 (any position) |
|||
|
Tool magazine |
|||||
|
Magazine type |
|
Knife arm type |
|||
|
Tool change mode |
|
Random |
|||
|
Magazine capacity |
T |
24 |
|||
|
Tool change time |
sec |
T to T 3.5 |
|||
|
Tool change time |
mm |
Ø105 |
|||
|
Maximum tool diameter without adjacent tools |
mm |
Ø200 |
|||
|
Maximum single tool weight |
KG |
15 |
|||
|
Maximum tool length |
mm |
300 |
|||
|
Controller model/main shaft and three-axis motor parameters |
|||||
|
System manufacturer |
Fanucco |
||||
|
Model |
OI-MF(1) PLUS |
||||
|
Spindle motor |
αiI18/8000 |
||||
|
X/Y/Z axis servo motor |
αif22/ αif30/ αif22B |
||||
|
Spindle servo motor power (KW) |
18.5/22 |
||||
|
Spindle servo motor torque (N-M) |
118/191 (continuous/15 points) |
||||
|
Three axis servo motor power (KW) |
X axis: 4.0/Y axis: 7.0/Z axis: 4.0 |
||||
|
Torque of three-axis servo motor (N-M) |
X axis: 64/Y axis: 83/Z axis: 64 |
||||
